> >
> Rotary Kiln
Follow Us:
bhs concrete mixer plant liners2
Our company has got the ISO9001 quality management system certification, and our products have been exported to Russia, Finland, Canada, Chile, Bolivia, India, Iran, Egypt and more than 80 countries and regions.
We're here to help:
Easy ways to get the answers you need.
- 0086-371-86081678, 63758707
- golden mix concrete batch plant hzs90
- 0086-371-63720313
china advanced concrete batching plant
Main function
Rotary kiln is composed of drum, driving unit, support unit, end seal unit, end shield and fuel unit. The shell fabricated from high-quality steel plate is supported on the supporting device of sliding bearing or rolling bearing. Mechanical or hydraulic thrust roller is installed on the support unit to control axial moving. The driving unit makes the drum rotate through the girth gear in the middle of the drum. To meet the need of installation and maintenance, the bigger kiln have auxiliary driving unit. The ends of kiln are provided with sealing unit to prevent cool air into the kiln and fuel dust out of kiln.technical parameter of metallurgy kiln:
| Specification (m) | Shell Speed (r/min) | Obliquity (%) | Capacity (t/h) | Bearings form | Block form | Motor power (KW) |
| Ø3.2×26A | 0.71~1.58 | 3.5 | 40 | Rolling Bearing | Hydraulic pressure | 90 |
| Ø3.2×28A | 0.67~1.69 | 3.5 | 50 | Rolling Bearing | Hydraulic pressure | 110 |
| Ø3.5×29C | 0.6~1.7 | 4 | 70 | Rolling Bearing | Hydraulic pressure | 160 |
| Ø4×28E | 0.48~1.6 | 4 | 90 | Rolling Bearing | Hydraulic pressure | 160 |
| Ø4×32 | 0.3~1.48 | 4.25 | 120 | Rolling Bearing | Hydraulic pressure | 160 |
| Ø4.3×32 | 0.5~1.6 | 4 | ≥120 | Rolling Bearing | Hydraulic pressure | 190 |
| Ø4.5×30 | 0.46~1.45 | 4 | ≥110 | Rolling Bearing | Hydraulic pressure | 250 |
| Ø4.6×33 | 0.46~1.45 | 4 | 140 | Rolling Bearing | Hydraulic pressure | 315 |
the concrete expo vietnam
| Specification (m) | Shell Speed (r/min) | Obliquity (%) | Capacity (t/h) | Bearings form | Block form | Motor power (KW) | Weight (t) |
| Ø2.2×45 | 0.504~1.51 | 3 | 5~6 | Rolling Bearing | mechanical | 55 | 12.58 |
| Ø2.84×55 | 0.1~2.5 | 3 | 8~10 | Rolling Bearing | mechanical | 75 | 248.35 |
| Ø2.84×58 | 0.25~2.5 | 3 | 8~10 | Rolling Bearing | mechanical | 75 | 262.4 |
| Ø3.6×62 | 1.6 | 3.5 | 12~15 | Rolling Bearing | mechanical | 110 | 410.768 |
technical parameter of chemical kiln:
| 规格specification | 转速rotating speed(r/min) | 斜度slope(%) | 产量capacity（t/h） | 轴承形式bearing | 挡轮形式thrust roller form | 电机功率motor power(KW) |
| Ø3x26.7 | 3.5 | 0.6 | 160 | 滚动rolling bearing | 机械mechanical | 257.8 |
| Ø3.6x42 | 3.5 | 0.6 | 220 | 滚动rolling bearing | 机械mechanical | 568.7 |
80m3 h 1600 1600l concrete batcher
| specification | Ø2.5x40 | Ø2.5x60 | Ø3x48 | Ø3x60 | Ø3x100.94 | Ø3.2x46 | Ø3.2x52 | Ø3.3x50 | ||
| capacity (t/d) | 180 | 168 | 700 | 450 | 1000 | 1200 | 1300 | |||
| incline of body(%) | 3.5 | 3.5 | 3.5 | 3.5 | 4 | 3.5 | 3.5 | 3.5 | ||
| support quantity(unit) | 3 | 4 | 3 | 4 | 4 | 3 | 3 | 3 | ||
| thrust roller type | mechanical | mechanical | mechanical | mecha- nical | mecha- nical | mecha- nical | mecha- nical | hydraulic | ||
| rotating speed of kiln(r/min) | main drive (r/min) | 0.98-2.94 | 0.516-1.549 | 0.726-3.63 | 0.492-1.476 | 0.3-1.503 | 0.36-3.57 | 0.343-2.34 | 0.676-3.38 | |
| auxiliary drive (r/h) | 0.036 | 0.036 | 0.1375 | 0.034 | 0.275 | 0.108 | 0.102 | 0.106 | ||
| main drive | motor | type | YCT315-4B | YCT355-4B | ZSN4-280-091B | YCT355-4B | ZSN4-250-21B | ZSN4-280-091B | ZSN4-280-21B | ZSN4-280-091B |
| (KW) | 45 | 75 | 110 | 75 | 90 | 160 | 125 | 160 | ||
| （r/min） | 132-1320 | 440-1320 | 200-1000 | 440-1320 | 0-1000 | 100-1000 | 100-1000 | 200-1000 | ||
| （V） | 380 | 380 | 440 | 380 | 440 | 440 | 440 | 440 | ||
| reducer | type | ZS145-1-Ⅰ | ZS165-7-Ⅱ | ZSY450-35-Ⅴ | ZL165-7-Ⅰ | NZS995-90-Ⅵ-L | NZS995-40Ⅵ-BR | ZSY1110-71BL-Ⅵ | NZS1110-40-Ⅵ | |
| speed ratio | 49.63 | 99.96 | 30.794 | 99.96 | 90 | 40 | 71.54 | 40 | ||
| speed indicating generator | (KW) | 22 | 22 | 22 | 22 | |||||
| （r/min） | 0-2000 | 0-2000 | 0-2000 | 0-2000 | ||||||
| （V） | 110 | 110 | 110 | 110 | ||||||
| auxiliary drive | motor | type | Y160M-6 | Y160M-6 | Y180L-6 | Y160M-6 | Y160M-6 | Y160M-6 | Y132M-4 | Y160M-4 |
| (KW) | 7.5 | 7.5 | 15 | 7.5 | 7.5 | 11 | 7.5 | 7.5 | ||
| （r/min） | 960 | 960 | 380 | 380 | 960 | 960 | 960 | 960 | ||
| （V） | 380 | 380 | 970 | 960 | 380 | 380 | 380 | 380 | ||
| reducer | type | PM400-Ⅲ-2 | PM400-Ⅲ-2ｙ | ZSY200.25-Ⅱ | PM400-Ⅲ-1§ | PM400-Ⅲ-§ｙ | NZS352-31.5-ⅡR | NZS352-2B-ⅠL | PM100-Ⅲ-Ⅰ | |
| speed ratio | 31.5 | 31.5 | 25 | 598 | 31.5 | 31.5 | 31.5 | 27.95 | ||
| total weight (excluding refractory brick)(t) | 142 | 222 | 244 | 190 | 526 | 257 | 275 | 266 | ||
| remark | kiln with shaft cyclone pre-heater | bauxite forge kiln | kiln with 5-stage cyclone pre-calciner | bauxite forge kiln | multiple-drum cooling | kiln with pre- heater pre-calcine | kiln with pre- heater | kiln with plateau suspension pre-heater | ||
| specification | Ø3.5x54 | Ø3.6x70 | Ø4x60 | Ø4.15x58 | Ø4.2x60 | Ø4.3x60 | Ø4.5x66 | Ø4.8x74 | ||
| capacity (t/d) | 1500 | 1800 | 2500 | 3000 | 3500 | 4000 | 5000 | |||
| incline of body(%) | 3.5 | 3.5 | 3.5 | 5 | 4 | 3.5 | 3.5 | 4 | ||
| support quantity(unit) | 3 | 4 | 3 | 3 | 3 | 3 | 3 | 4 | ||
| thrust roller type | hydraulic | hydraulic | hydraulic | hydraulic | hydraulic | hydraulic | hydraulic | hydraulic | ||
| rotating speed of kiln(r/min) | main drive(r/min) | 0.55-3.4 | 0.25-1.25 | 0.396-3.96 | 0.35-0.7 | 0.4-3.98 | 0.396-3.96 | 0.41-4.1 | 0.396-3.96 | |
| auxiliarydrive (r/h) | 0.105 | 0.039 | 0.14 | 0.05 | 0.142 | 0.142 | 0.14 | 0.12 | ||
| main drive | motor | type | ZSN4-3156-092 | ZSN4-280-11B | ZSN4-355-092 | Y315S-4 | ZSN4-355-12 | ZSN4-355-12 | ZSN4-400-22 | ZSN4-400-92 |
| (KW) | 220 | 125 | 315 | 110 | 375 | 375 | 560 | 630 | ||
| （r/min） | 100-1000 | 200-1000 | 100-1000 | 100-1000 | 100-1000 | 100-1000 | 1500 | |||
| （V） | 440 | 440 | 440 | 440 | 660 | 660 | ||||
| reducer | type | ZSY500-40-Ⅴ | ZS177-5-Ⅱ | ZSY630-35.5-Ⅰ | ZSY710-40-Ⅰ | ZSY710-40 | JH800C-SW306 | JH710-40 | ||
| speed ratio | 40 | 79.2 | 34.601 | 40 | 40 | 35.5 | 42 | |||
| speed- indicating generator | (KW) | 22 | 22 | 22 | 22 | 45 | 45 | |||
| （r/min） | 0-2000 | 0-2000 | 0-2000 | 0-2000 | 0-2000 | 0-2000 | ||||
| （V） | 110 | 110 | 110 | 110 | 110 | 110 | ||||
| auxiliary drive | motor | type | Y200L-6B3 | Y132M-4 | Y200L-4 | Y160M-4 | Y200L-4 | Y200L-4 | Y250M-4 | Y250M-4 |
| (KW) | 18.5 | 7.5 | 30 | 11 | 30 | 30 | 55 | 55 | ||
| （r/min） | 970 | 1440 | 1470 | 1480 | 1470 | 1470 | 1470 | 1470 | ||
| （V） | 380 | 380 | 380 | 380 | 380 | 380 | 380 | 380 | ||
| reducer | type | ZSY180-31.5-Ⅱ | Z142.5-17-Ⅰ | ZL65-16-Ⅱ | ZLY140-14-Ⅰ | ZL65-16-Ⅱ | ZL65-16-Ⅱ | YSY280-31.5-Ⅱ | JH220C | |
| speed ratio | 27.55 | 31.5 | 45 | 14 | 40.8 | 45 | 31.25 | 28 | ||
| total weight (excluding refractory brick)(t) | 363 | 419 | 510 | 620 | 533 | 553 | 710.4 | 841 | ||
| remark | kiln with pre- heater pre- calcine | generating kiln for using afterheat | kiln with pre- heater pre- calcine | leaching of zinc( calcining kiln) | kiln with pre- heater pre- calcine | kiln with pre- heater pre- calcine | kiln with pre- heater pre- calcine | |||
Services
Supply the most current design and technical expertise;Supply parts sales and training service far beyond the initial sale;Your profits with quality parts and expert service.
75m3 ready mix concrete baching plantGet Price And Support
Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).
Feedback Form
precast concrete wall machine